What equipment is needed in waste circuit board recycling?

The waste circuit board recycling equipment is needed in waste circuit board recycling. Today, I will introduce the waste circuit board recycling equipment in details to you.

Waste circuit board

The waste circuit board recycling equipment in DOING mainly includes the following single equipment:

1.Shredder: The shredder is used to shred waste circuit board to 3-5cm. The blade material for Double-shaft shredder is H13 alloy with high hardness and high toughness, specially used for metal processing. The using time is two time longer than normal blade.

2.First Hammer Crusher: After the first hammer crusher, the waste circuit board will be crushed to about 1 cm. The crusher use 65Mn alloy blades, which has good toughness and high wear resistance guarantee.

3.Belt Conveyor and Magnetic Separator: After the conveyor belt and magnetic separator, the iron is basically all disposed. At the same time, the iron removal efficiency is very high. As long as the front materials can be separated, the magnetic separator can remove all the iron.

Single equipment

4.Second Hammer Crusher: After the second hammer crusher, metal and nonmetal are basically broken. Usually, the waste circuit board will be crushed to about 4mm, and the diameter of the broken screen pipe is generally 4mm.

5.Eddy-Vibration Screen: The materials are transported to the Eddy-Vibration screen by the wind. The role of the Eddy-Vibration screen is mainly to control the size of the materials. Normally, the mesh size of the Eddy-Vibration screen is 20 to 24 meshes.

6.Air Separator: After the air separator, more than 95% of the metals will be screened. Air separator, taking advantage of Italian air suspension principle to separate copper and plastic. It adopt variable frequence control knob to adjust machine to get high separation rate,very easy to operate.

7.Electrostatic Separator: The electrostatic separation system can perfectly recycle metal, with a recovery rate of 99.5%, and the remaining non-metal is resin. Electrostatic separator can separate metal and plastic by high voltage electrostatic, along with bucket elevator to form an automatic sorting circle system to get high separate rate over 99.9%6. Pulse dust collector, equip with pulse valve to clean dust automatically, has high dust remove rate over 99.5%.

Waste circuit board recycling equipment

These are all the single equipment available in waste circuit boards recycling. You can choose the appropriate configuration according to your needs. If you want to use waste circuit board recycling equipment to recycle waste circuit board, welcome to contact with DOING. We have specialized engineers who can design the appropriate waste circuit board recycling equipment for you according to your needs.